Thursday, May 19, 2011

setting modem yang digunakan untuk layanan Telkom Speedy

Informasi setting modem yang digunakan untuk layanan Telkom Speedy

Adsl Modem SMC

Default IP: 192.168.2.1
Default password: smcadmin
Setting Bridge:


  1. Klik WAN
  2. Clik ATM PVC
  3. Klik VCI
  4. Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10
  5. Klik Save Settings
    6.  
    SMC

    Setting PPPoE:
    1. Klik WAN
    2. Klik ATM PVC
    3. Klik VCI
    4. Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR, PCR/SCR/MBS: 4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0, Subnet Mask: 0.0.0.0, Connect Type: Always Connected, Idle Time (Minute): 5, Username: nmrspeedy@telkom.net, Password: (password dari telkom), Confirm Password: , MTU: 1492
    5. Save Settings

    Adsl Modem ZyXeL

    P-660R
    Default IP: 192.168.1.1
    Default username: admin
    Default password: 1234
    Setting Bridge
    1. Pilih Network
    2. Pilih WAN
    3. Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
    4. Pilih Maintenance
    5. Pilih Tools
    6. Restart
    Setting PPPoE
    1. Pilih Network
    2. Pilih WAN
    3. Mode: Routing, Encapsulation: PPPoE, Username: ( nmrspeedy@telkom.net), Password: (password speedy), Service Name: Speedy, Multiplexing: LLC, VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically, Connection: Nailed-Up Connnection, Apply
    4. Klik Maintenance
    5. Klik Tools
    6. Restart

    Adsl Modem Shiro

    Default IP: 192.168.1.1
    Default username: admin
    Default password: admin
    Setting Bridge:
    1. Klik Advanced
    2. Klik WAN
    3. Klik New Connection
    4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit
    5. Save Settings
    6. Restart Router
    shiro
    Setting PPPoE:
    1. Pilih Advanced
    2. Pilih WAN
    3. Klik New Connection
    4. Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit
    5. Save Settings
    6. Restart Router
    shiro pppoe

    Adsl Modem Aztech

    Default IP: 192.168.1.1
    Default username: admin
    Default password: admin
    Setting Bridge:
    1. Klik Advanced
    2. Klik WAN
    3. Klik New Connection
    4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit.
    5. Save Settings
    6. Restart Router
    Setting PPPoE/Router:
    1. Klik Advanced
    2. Klik WAN
    3. Klik New Connection
    4. Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit.
    5. Save Settings
    6. Restart Router

    Adsl Modem TECOM

    AR1031
    Default ip: 192.168.1.1
    Default username: admin
    Default password: admin
    Setting Bridge:
    1. Klik Advanced Setup
    2. Klik WAN
    3. Klik Edit
    4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
    5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
    6. Cheklist Enable Bridge Service, Service Name: Speedy, Next
    7. WAN Setup - Summary, Save
    8. Save/Reboot
    tecom
    Setting PPPoE:
    1. Klik Advanced Setup
    2. Klik WAN
    3. Klik Edit
    4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
    5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
    6. Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
    7. Cheklist Enable WAN Service, Service Name: Speedy, Next
    8. WAN Setup - Summary, Save
    9. Save/Reboot
    tecom pppoe

    Adsl Modem Billion

    Setting:
    1. Login To: http://192.168.1.254
    2. User name = admin; Password = password dari telkom
    3. Klik -> OK
    4. Klik: Quick Start
    5. Edit Connection:
      Encapsulation = PPPoE LLC
      Bridge = Enabled
      Setting VPI = 8 dan VCI = 81 , and Than
      Static IP Setting
      IP Address = 0.0.0.0
      subnet mask = 0.0.0.0
      Gateway = 0.0.0.0
    6. Klik: - Submit
      - SAVE CONFIG
    7. Klik: Submit
    8. Wait Till process Configuration done !
    9. Configuration Done !

    Modem Prolink

    1. Login To -> http:// 10.0.0.2
      User Name: admin
      Password: password
      Klik . . . . OK
    2. Chose Configurasi WAN:
    3. Select Adapter: Pilih Pvc3 (Indonesia)
    4. Edit Field:
      Bridge = Enable
      Encapsulation = 1483 Bridge IP LLC
      ATM VPI = 8
      ATM VCI = 81 prolink
    5. Static IP Setting: “ just blank “
      IP Address = just empty
      Subnet Mask = just empty
      Gateway = just empty
      User Name = username@telkom.com. . . . . . ( optional ) *
      Password = xxxxxxxx . . . . . . . . . . . . . . . . . . .( optional ) *
      * If you choose to put username & password there just double clik explorer
      * If you not choose to put username & password there you have to create new connection at Network Connection
    6. Create New Connection (Bridge) See here..>>
    7. Than Next:
    8. * Klik Submit
    9. * Klik Save Configuration
    10. Next: Save Reboot ….

    Adsl Modem D-Link

    DSL-302T
    Default IP: 192.168.1.1
    Default username: admin
    Default password: admin
    Setting Bridge:
    1. Klik Setup
    2. Klik Connection
    3. Bridge Connection Setup. Name: Speedy; Type: Bridge; Encapsulation: LLC; VPI=8; VCI=81, Apply
    4. Klik Tools
    5. Klik System Commands, Save All, Restart
    d-link
    Setting PPPoE/Router:
    1. Klik Setup
    2. Klik Connection
    3. Bridge Connection Setup. Name: Speedy; Type: PPPoE; Username: nmrspeedy@telkom.net; Password: (password dari telkom); VPI=8; VCI=81, Apply
    4. Klik Tools
    5. Klik System Commands. Save All, Restart
    d-link2

    adsl Modem Repotec

    1. Buka Internet Explorer ketik: http://192.168.1.1
    2. Username: admin & Password: epicrouter
    3. Klik: OK
    4. Klik WAN
    5. Pic Adapter: Pvc0
    6. Klik Submit
    7. Virtual Circuit = Enabled
    8. Bridge & IGMP = Disable
    9. Each region was different from another region and for Bandung vpi:8 , vci: 81
    10. Service Category = UBR without PCR
    11. Protocol/Conection type = PPPoE
    12. Encapsulation = LLC/Snap-Bridging
    13. Put Username & Password from your provider
    14. Klik Submit.
    15. Klik Save Configuration (wait till Saving configuration done.)
    16. put DNS: 202.134.0.155 & 202.134.2.5

    Adsl Modem Dareglobal

    Default IP: 192.168.1.1
    Default username: admin
    Default password: admin
    Setting Bridge:
    1. Klik Advanced Setup
    2. Klik WAN
    3. Find VPI/VCI: 8/81, Klik Edit
    4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
    5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
    6. Cheklist Enable Bridge Service, Service Name: Speedy, Next
    7. WAN Setup - Summary, Save
    8. Save/Reboot
    Setting PPPoE:
    1. Klik Advanced Setup
    2. Klik WAN
    3. Cari VPI/VCI: 8/81, Klik Edit
    4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
    5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
    6. Put your PPP Username: Nomorspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
    7. Centang Enable WAN Service, Service Name: Speedy, Next
    8. WAN Setup - Summary, Save
    9. Save/Reboot

    Adsl Modem TP-Link

    Default IP: 192.168.1.1
    Default username: admin
    Default password: admin
    Setting Bridge:
    1. Klik Advanced Setup
    2. Klik WAN
    3. Find VPI/VCI: 8/81, Klik Edit
    4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
    5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
    6. Cheklist Enable Bridge Service, Service Name: Speedy, Next
    7. WAN Setup - Summary, Save
    8. Save/Reboot
    dareglobal
    Setting PPPoE:
    1. Klik Advanced Setup
    2. Klik WAN
    3. Find VPI/VCI: 8/81, Klik Edit
    4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
    5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
    6. Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
    7. Cheklist Enable WAN Service, Service Name: Speedy, Next
    8. WAN Setup - Summary, Save
    9. Save/Reboot

    Setting Modem Articonet ACN-100R dan ACN-110

    Cara melakukan setting di komputer untuk akses ke modem Articonet.
    Untuk setting di komputer dilakukan sesuai dengan operating system yang dipakai di komputer pelanggan, disini yang dibahas khusus untuk Windows XP.
    Lakukan network setting di PC (komputer) sbb:
    a. Start – Control Panel – Network Connection
    b. arahkan kursor pada Local Area Connection yang aktif, kemudian klik kanan dan pilih properties
    c. kemudian pilih menu Internet Protocol (TCP/IP) dan klik 2X, maka akan muncul menu General.
    d. Pilih Obtain an IP Address Automatically kemudian pilih Obtain DNS server address automatically, kemudian tekan tombol OK.
    Panduan cara setting modem ADSL Speedy koneksi PPPoE.(PPPoE)
    Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
    Masukkan username dan password: admin/admin
    Setelah masuk ke menu setting lakukan langkah berikut:
    Masuk ke menu "Advanced Setup" kemudian pilih "WAN" dan klik tombol "Edit" disebelah kanan tabel WAN Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
    VPI = X
    VCI = XX
    Service Category = UBR Without PCR, kemudian klik tombol Next
    Connection type = PPPoE
    Encapsulation = LLC, kemudian klik tombol Next
    Masukkan username dan password Speedy, kemudian klik tombol Next
    Tandai atau kasih v untuk pilihan "Enable WAN Service", kemudian klik Next dan klik tombol Save
    Setting PPPoE untuk koneksi Speedy telah selesai dilakukan
    Selanjutnya klik tombol Save/Reboot
    (Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)
    Berikut langkah setting modem ADSL Articonet untuk Dial-Up/Bridge.
    Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
    Masukkan username dan password: admin/admin
    Setelah masuk ke menu setting lakukan langkah berikut:
    Masuk ke menu "Advanced Setup" kemudian pilih "WAN" dan klik tombol "Edit" Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
    VPI = X
    VCI = XX
    Service Category = UBR Without PCR, kemudian klik tombol Next
    Connection type = Bridging
    Encapsulation = LLC, kemudian klik tombol Next
    Tandai atau kasih v untuk pilihan "Enable Bridge Service", kemudian klik Next dan klik tombol Save
    Setting Bridge untuk koneksi Speedy telah selesai dilakukan
    Selanjutnya klik tombol Save/Reboot
    (Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)
    Setting modem Articonet untuk koneksi Bridging sudah selesai, langkah berikutnya setting koneksi Dial-Up di PC/komputer.
    Panduan instalasi Dial Up koneksi ADSL menggunakan Windows 2000:
    1. Klik Start, klik Setting,klik Control Panel,
    2. Klik Network and Dial Up Connections.
    3. Klik Make New Connection, klik Next,
    4. Klik Dial Up to the Internet
    5. Klik I want to setup my internet manually, klik Next
    6. Klik I connect through a phone line and a modem klik Next
    7. Pilih dan klik modem ADSL yang sesuai
    8. Isi username:15xxxxxxxxxx@telkom.net
    9. Password: xxxxxxxx
    10. Klik OK dan Lanjutkan sesuai perintah yang muncul
    11. Klik Finish
    Panduan installasi Dial Up koneksi ADSL menggunakan Windows Xp:
    1. Klik Start, klik Setting, klik Control Panel.
    2. Klik Network Connection
    3. Klik Create a New Connection, klik Next.
    4. Klik Connect to the Internet, klik Next
    5. Klik Setup my connection manually, klik Next
    6. Klik Connect Using Dial Up, klik Next
    7. Klik modem ADSL yang sesuai, klik Next
    8. Isi username: 15xxxxxxxxxx@telkom.net dan Password: *******
    9. Confirm password: xxxxxxxx
    10. kemudian beri tanda v pada pilihan "Add a shortcut to the desktop screen"
    11. Klik Finish

      di

      No comments:

      Post a Comment

      Subscribe to: Post Comments (Atom)